Stainless Steel 304 Continuous Hinge with Hole, Bright Annealed Finish, 0.04" Leaf Thickness, 1-1/2" Open Width, 5/64" Pin Diameter, 1/2" Knuckle Length, 3' Long (Pack of 1)
On Sale Now! Save 4% on the Stainless Steel 304 Continuous Hinge with Hole, Bright Annealed Finish, 0.04'' Leaf Thickness, 1-1/2'' Open Width, 5/64'' Pin Diameter, 1/2'' Knuckle Length, 3' Long (Pack of 1) by Small Parts at Enria Industries. MPN: BA1003X36. Hurry! Limited time offer. Offer valid only while supplies last. The stainless steel 304 continuous hinge has countersunk holes and is suitable for surface-mounted applications requiring uninterrupted support
The stainless steel 304 continuous hinge has countersunk holes and is suitable for surface-mounted applications requiring uninterrupted support along the full length of the pieces being joined, such as appliance doors, industrial kitchen equipment, and metal storage cabinets. Stainless steel 304 resists corrosion up to 1,500 degrees F and is suitable for applications used in corrosive environments, though not as resistant to corrosion as stainless steel 316. A weldable material, stainless steel 304 is stronger than steel and aluminum. The bright annealed finish gives this hinge a mirrorlike appearance and offers additional protection against corrosion. This finished hinge is suited for applications such as cabinetry and piano lids where a polished hinge (as opposed to a flat finished or unfinished hinge) is a priority. The range of motion for this hinge is 270 degrees from the folded position.
Continuous hinges, also called piano hinges, provide support to run the full length of the doors, panels, or pieces being joined together. They are manufactured in a variety of materials and sizes, with or without holes, finished or unfinished, and can be cut to specific sizes. They also vary by knuckle length, pin diameter, leaf thickness, and open width. The knuckle is the tubular part of the hinge through which the pin passes, and knuckle length is the measurement of an individual section. The pin runs the length of the hinge holding the leaves together. The leaf is the flat metal portion of the hinge that extends laterally from the knuckle and revolves around the pin. Open width is the dimension from the outer edge of one leaf to the outer edge of the other when the hinge is fully open.
Features & Highlights
- Surface-mounted for applications requiring continuous support along the full length of the hinge, such as appliance doors, industrial kitchen equipment, and metal storage cabinets
- Stainless steel 304 is corrosion resistant up to 1,500 degrees F (though less resistant to corrosion than stainless steel 316), weldable, and stronger than steel and aluminum
- Countersunk holes for convenience when mounting
- Bright annealed finish for additional protection against corrosion and a polished, mirrorlike appearance
|Package Weight:||0.8 pounds|
|Package Size:||2 x 1 x 1 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Small Parts, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: 852868, ean: 0008236990409,
Heavy Duty Adjustable Spring Hinges are designed for screen doors, utility doors and anywhere a self-closing spring is desired. Self-closing spring tension is factory pre-set. Hinge is adjustable to control closing speed. Can be used for left or righ...
mpn: KNUCKLE BENDER, ean: 0663807010513,
Do you have a door that sticks or is not quite square anymore? The KnuckleBender by FastCap can help. It features a knockout pin and hammer tab so you can tap out the alignment pins. The 1/2-Inch metal jaws grab the hinge knuckle without marring it s...
By QEP Co Inc
mpn: 10085, ean: 0010306100854,
The Pin Popper was designed simply to ease the removal of door hinge pins utilizing one high quality hand tool. This easy-to-use, durable tool, incorporates the strength of nickel plated hardened steel while minimizing damage to surrounding areas wit...
mpn: 38N355BE08x20S, ean: 0752097295639,
To determine the needed overlay... measure how much the cabinet door covers the face of the cabinet on the hinge side. To use this hinge the dimension (overlay) should be 1/2".3-Way adjustable in and out cam adjustment: +/- 1/16. Screw On Designed fo...
By Small Parts
The stainless steel 304 continuous hinge has countersunk holes and is suitable for surface-mounted applications requiring uninterrupted support along the full length of the pieces being joined, such as appliance doors, industrial kitchen equipment, a...
mpn: DSH35R515, ean: 0760923539543,
DSH35R515 Finish: Brushed Nickel Features: -Material: Steel. -Tension hex wrench, straight wrench, locking pin and steel screw. -Available in an array of fine finishes. Hinge Type: -Spring. Number of Mounting Holes: -6. Style: -Contemporary. Dimensio...
mpn: PDL26D/15, ean: 0086787422525,
Pemko offers a line of door hardware and gasketing products designed for noise and light reduction. These products are perfect for hotels, condos, dormitories and commercial buildings. You can rest easy knowing that our products are rigorously tested...
mpn: 00024005, ean: 0034223240066,
Upgrade to durable stainless steel Whether you are wanting to take your cooler to the next level, or just looking to replace a broken classic hinge-Igloo stainless steel hinges refresh your cooler with an updated and classy look. Care: Wipe surface c...
By ABH Manufaturing
mpn: ABH 0128 US32D,
0320 Top Pivot Frame leaf mortises into header Door leaf mortises into top of door 0128 Bottom Pivot Bottom leaf mortises on top of finished floor Door leaf mortises into bottom of door Non-Handed Pivot set is centered into the door thickness M...
Door closer, hydraulic, flush, kason 1092-04 body is 4-5/8" tall ( by mount area ) and 2-1/4" wide"mount area 1.43" x 4.537", 3-5/8" mt hole ctrs. Od.crosses to bally # 16768replaces the following manufacturer's products oem numbers are used for refe...