Precision Twist EB6302 Carbide Ball Nose End Mill, Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 6" Overall Length, 1/2" Cutting Diameter, 1/2" Shank Diameter
Mega Sale! Free Shipping Included! Save 25% on the Precision Twist EB6302 Carbide Ball Nose End Mill, Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 6'' Overall Length, 1/2'' Cutting Diameter, 1/2'' Shank Diameter by Precision Twist Drill at Enria Industries. MPN: EB63021/2. Hurry! Limited time offer. Offer valid only while supplies last. The Precision Twist EB6302 uncoated carbide long length ball nose end mill has two flutes and a 30-degree helix for machining steel, hardened steel,
The Precision Twist EB6302 uncoated carbide long length ball nose end mill has two flutes and a 30-degree helix for machining steel, hardened steel, steel alloys, stainless steel, cast iron, copper, brass, bronze, aluminum, and aluminum alloys. Long length end mills have longer cutting edges than standard length end mills for applications with a high depth of cut. The two flutes have better chip-carrying capacity than end mills with more flutes while offering additional support when the tool goes deep into the material in applications with a high depth of cut. The tool’s ball nose creates contoured surfaces, where sharp corners are not required. The 30-degree helix angle supports general-purpose applications. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action. The center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit.
Carbide is harder than high-speed or cobalt steel, making it more wear resistant at high speeds and providing longer tool life. This tool has no coating or surface treatment. Cutting diameter tolerance is + 0.000 to - 0.002". The round shank accommodates a range of tool holders.
End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.
Dormer Pramet manufactures cutting tools under the following brands: Precision Twist Drill, Dormer, Union Butterfield and Pramet. The company has locations around the world, and provides tools adhering to ANSI, NAS, and DIN standards.
Features & Highlights
- Suitable for machining steel, hardened steel, steel alloys, stainless steel, cast iron, copper, brass, bronze, aluminum, and aluminum alloys
- Long length end mills have longer cutting edges and can make deeper cuts than standard length end mills
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool's ability to remove material
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Uncoated (bright) tools have no additional surface treatment or coating for use on a range of materials
|Brand:||Precision Twist Drill|
|Package Weight:||0.48 pounds|
|Package Size:||0.7 x 0.6 x 0.6 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Precision Twist Drill, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
By Huanyu Instrument
mpn: HYT-216E, ean: 7467317514089,
Huanyu Instrument Huanyu Instrument® mainly provides instruments and tools. We provide voltage customized services, specific requirements can be contacted by email, we will respond promptly.After your order is confirmed, the product usually takes 7...
mpn: 350096, ean: 0662755132902,
JET has the tool kits and accessories you need to ensure superior performance of your MIlling Machine.Will fit JET Mill models JTM-1050 and JTM-1050EVS. Adds 8" height capacity. Includes all mounting hardware. ...
By Kodiak Cutting Tools
This carbide end mill set features high quality USA made Kodiak brand end mills which are made from premium sub-micrograin carbide. This kit contains 5-flute high-performance 45 degree end mills which are center cutting. These tools are designed for ...
mpn: 350089, ean: 0731325201222,
The JET X-Axis Table Powerfeed provides continuously variable feed rate of up to 37in. per minute. Works with some JET milling and drilling machines.Will fit all JET Mill models. Provides continuously variable feed rate of up to 37 inch/min.. Install...
By Accusize Industrial Tools
Fitted with 10° positive rectangular insert allow high depth of cut and feed per tooth •Uses APKT / APHW / APKR_APHT / APMT insert (sold separately) •Cutting Diameter: 5" •Arbor Hole d: 1-1/2" •Overall Length: 2.00" •ap: 0.551: •No. of I...
mpn: 660058, ean: 0662755105845,
Jet 660058 CK-58, 52-Piece Clamping Kit with Tray for T-SlotMetal storage tray can be mounted on machine or wall. Three complete sets to choose from. 52-piece kit includes: Six T-slot nuts. Six flange nuts. ...
mpn: 30181, ean: 0691781301815,
SGS General Purpose End Mills are manufactured to the highest standards on state of the art CNC equipment. Held to the same standard as High Performance product, the SGS General Purpose End Mill delivers consistent dependable performance beyond a typ...
mpn: 36125, ean: 0691781361253,
SGS roughing end mills are available in 3 very distinct styles to meet the needs of specific material groups. The carbide is designed to compliment the demanding environment of roughing operations. Each version has an engineered chip breaking form to...
By Niagara Cutter
mpn: STRN440-0.500-E2-R030.3-Z4, ean: 0698036575328,
The Niagara Cutter STRN440 Stabilizer TiAlN-coated carbide corner radius end mill with four flutes features an extended-reach neck style and the patented Stabilizer flute design, which combines variable helix angles and unevenly spaced flutes of diff...
By Kodiak Cutting Tools
This carbide end mill set features high quality USA made Kodiak brand end mills which are made from premium sub-micrograin carbide and ALTiN coated. This kit contains 4-flute stub length end mills which are center cutting. Shank diameter is the same ...