Niagara Cutter N57532 Carbide Corner Radius End Mill, Weldon Shank, AlTiN Finish, Roughing/Finishing Cut, 40-Degree, 4-Flute, 5" OAL, 0.500" Cut Diameter, 0.500" Shank Diameter, 0.03" Radius
Niagara Cutter N57532 Carbide Corner Radius End Mill, Weldon Shank, AlTiN Finish, Roughing/Finishing Cut, 40-Degree, 4-Flute, 5'' OAL, 0.500'' Cut Diameter, 0.500'' Shank Diameter, 0.03'' Radius by Niagara Cutter at Enria Industries. MPN: STRN440-0.500-E2-R030.3-Z4. Hurry! Limited time offer. Offer valid only while supplies last. The Niagara Cutter STRN440 Stabilizer TiAlN-coated carbide corner radius end mill with four flutes features an extended-reach neck style and the
The Niagara Cutter STRN440 Stabilizer TiAlN-coated carbide corner radius end mill with four flutes features an extended-reach neck style and the patented Stabilizer flute design, which combines variable helix angles and unevenly spaced flutes of differing lengths to allow deeper cuts at higher speeds on high-temperature alloys. The helix angle varies from tooth to tooth to reduce tool vibration and provide efficient chip removal. The unequal length and spacing of the flutes creates an out-of-phase cutting action that further reduces tool vibration and extends tool life. The TiAlN coating resists heat better than TiN and TiCN coatings, increasing tool life and performance. It also offers increased hardness compared to TiN and may reduce the need for lubricants based on the application. The carbide substrate is harder than high-speed or cobalt steel, making it more wear resistant at high speeds and hot temperatures, providing longer tool life. The Stabilizer flute geometry, carbide substrate, and TiAlN coating make the STRN440 suitable for machining the high-temperature alloys used in the commercial aircraft, aerospace, and defense industries
The four-flute design is suitable for fine finishing. The extended-reach neck style provides greater access to recessed areas of the workpiece than tools with a standard neck style. Corner radius end mills have a square end with rounded corners on the cutting edges to reduce chipping and extend the life of the tool. The center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit. The tool has an eccentric primary relief feature that provides better support behind the cutting edge than a flat relief, reducing tooth breakage in deep cuts. Cutting diameter tolerance is +0.000" to -0.002". The STRN440 comes with a round shank for shank diameters smaller than 3/8” and a Weldon shank on shank diameters of 3/8” or larger.
End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.
Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at facilities in Pennsylvania and Massachusetts. This allows the company control over production, from substrate to coating, which is essential for customers in a variety of industries, especially aerospace and automotive.
Features & Highlights
- The combination of Stabilizer flute geometry, carbide substrate, and TiAlN coating make this end mill suitable for use on high-temperature alloys
- Stabilizer flute design uses unequal spacing and variable helix angles to minimize tool vibration and remove up to three times more chips per minute than conventional carbide end mills
- Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than TiN and TiCN coatings
- Extended-reach neck style provides access to recessed areas of the workpiece
- Corner radius end mills have cutting edges with rounded corners to reduce chipping and provide longer tool life
|Package Weight:||0.48 pounds|
|Package Size:||0.7 x 0.6 x 0.6 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Niagara Cutter, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
By Kodiak Cutting Tools
This carbide end mill set features high quality USA made Kodiak brand end mills which are made from premium sub-micrograin carbide and ALTiN coated. This kit contains 4-flute stub length end mills which are center cutting. Shank diameter is the same ...
mpn: 0028-6908, ean: 0637665773675,
NORTHWARD is the brand owned by Accusize Industrial Tools. All the premium cutting tools supplied by Accusize Industrial Tools carry the brand, NORTHWARD. The title of the listing still starts with "AccusizeTools", the actual brand of the item is NOR...
mpn: 43179-76842, ean: 0702383261312,
Set 8 Pcs Dp16 No1 :Z12~13; No2 :Z14~16; No3 :Z17~20; No4 :Z21~25; No5 :Z26~34; No6 :Z35~54; No7 :Z55~134; No8 :≥135Set 8 Pcs Dp16 ：pressure angle: 14.5 degree. Set 8 Pcs Dp16 ： Outside Dia: 55mm. Set 8 Pcs Dp16 ：inner Bore: 22mm. R8 ...
By Accusize Industrial Tools
mpn: G0704, ean: 0690550106965,
This great little machine sports some of the same features found on much larger mill/drills: dovetail column, variable speed 1 HP motor, R-8 spindle with digital read out, tapered gibs with double locks, large 7-1/16" x 26-5/8" table and it comes wit...
mpn: 0384-2045, ean: 0716352551786,
This heavy duty system cuts up to 3/4" (19.1 mm) or 8" (203.2 mm) with optional tips. It welds up to 1/8" (3.2 mm) or 3" (76.2 mm) with optional nozzles. Includes: Ess3 Series regulators; 100FC torch handle with built-in Flashback arrestors and check...
mpn: 0384-2691, ean: 0716352567923,
This heavy/medium duty system cuts up to 3/4" (19.1 mm) or 6" (152.4 mm) with optional tips. It welds up to 1/8" (3.2 mm) or 3" (76.2 mm) with optional nozzles. Includes: Heavy duty construction; G350 Series regulators; WH411C torch handle with built...