Niagara Cutter N56016 Carbide Ball Nose End Mill, Inch, TiAlN Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 1.5" Overall Length, 0.063" Cutting Diameter, 0.125" Shank Diameter
Save 1% on the Niagara Cutter N56016 Carbide Ball Nose End Mill, Inch, TiAlN Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 1.5'' Overall Length, 0.063'' Cutting Diameter, 0.125'' Shank Diameter by Niagara Cutter at Enria Industries. MPN: CB430-0.063-F2-B.0-Z4. Hurry! Limited time offer. Offer valid only while supplies last. The Niagara Cutter CB430 TiAlN-coated carbide ball nose end mill has four flutes and a 30-degree helix angle for general-purpose machining on a
The Niagara Cutter CB430 TiAlN-coated carbide ball nose end mill has four flutes and a 30-degree helix angle for general-purpose machining on a range of materials. The tool’s ball nose creates contoured surfaces where sharp corners are not required, and the center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit. Four flutes produce a better finish than fewer flutes. The 30-degree helix angle supports general-purpose applications. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action.
The TiAlN coating resists heat better than TiN and TiCN coatings, increasing tool life and performance. It also offers increased hardness for abrasion resistance and may reduce the need for lubricants based on the application. (TiAlN is suitable for a range of materials, but TiCN or uncoated end mills are recommended for machining aluminum.) The carbide substrate is harder than high-speed or cobalt steel, making it more wear resistant at high speeds and providing longer tool life. Cutting diameter tolerance is +0.000” to -0.002”. The round shank accommodates a variety of holders.
End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.
Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at facilities in Pennsylvania and Massachusetts. This allows the company control over production, from substrate to coating, which is essential for customers in a variety of industries, especially aerospace and automotive.
Features & Highlights
- Four flutes produce a better finish than fewer flutes
- Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance, offering better heat resistance than TiN and TiCN coatings
- Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures
- Ball nose end mills (also called ball end) create contoured surfaces
- Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling
|Package Weight:||0.1 pounds|
|Package Size:||0.5 x 0.4 x 0.4 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Niagara Cutter, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
By Melin Tool
mpn: 17860, ean: 0733438178606,
Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coating...
mpn: ZTD0049, ean: 0701304998719,
Specification: Material: solid carbide(Tungsten steel) Shank diameter: 3.175mm /0.125 inch Cutting edge diameter: 0.5mm Total length: approx. 38.00±0.20mm Features: These Engraving bits have sufficient flexural strength and wear resistance Mi...
By Kodiak Cutting Tools
mpn: KCT131536, ean: 0789957162787,
3/16 Inch Diameter Solid Carbide End Mill - Coated 3/16" Shank 3/8" Length of Cut 2" Overall Length 4 Flute Carbide - ALTiN Coated Diameter Tolerance: +.000"/-.002"ALTIN is a high performance coating for milling, tapping and drilling in stainless ste...
By Melin Tool
mpn: 47688, ean: 0733438476887,
Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Titanium carbonitride coatings are harder and more wear-resistant than TiN for impr...
-Type: Tapered angle Ball Nose End Mill / Cone Cutters -Flutes: 2 Flutes -Tip Radius: 2.0mm -Shank Diameter: 1/4"((d1) -Cutting Length: 1-1/4"(L1) -Overall Length: 3"(L) -Single side angle B=2.12°(Approx.) -Coating: TiAIN -Material: imported tun...
Used to create a uniform chamfer on the edge of any work piece to add character, while retaining crisp geometric lines.Suitable for cutting all composition materials, plywoods, hardwoods, and softwoods.Used on hand-held and table-mounted portable rou...
mpn: 79742, ean: 0083771797423,
Eazypower Corporation is a family owned company, started by the Kozak family back in 1985. Eazypower offers over 17,000 original items including the patented Hex bit Drills and Tub-O-Tips Rack. Other patented items include One-Way Screw Removers, Spi...
Set includes: -#6 (overall length: 3'' long) -#8 (overall length: 3'' long) -#10 (overall length: 3-1/2'' long) -1/4'' (overall length: 4-7/8'' long) -5/16'' (overall length: 5'' long) -3/8'' (overall length: 6'' long) -1/2'' (overall length: 7-1/2''...
By Kodiak Cutting Tools
mpn: KCT149560, ean: 0789957176173,
1/8 Inch Diameter Solid Carbide End Mill - HP 45° 2&3 Flute for Aluminum 1/8" Shank 1/2" Length of Cut 1-1/2" Overall Length 2 Flute Carbide - High Performance - 45° For Alum.Made In the USA. 1/8 Shank diameter. 1/2 Length of Cut. 1-1/2 Overall Len...
By Cobra Carbide
Cobra Carbide general end mill has center cutting geometry. Designed for milling, slotting, profiling and trace milling. Used for finishing operation. Manufactured from premium sub micron grain carbide. Solid carbide tools offer long tool life and fa...