Inkbird ITC-1000 Dual Stage Digital Temperature Controller Fahrenheit and Celsius Thermostat with Sensor for 3D Printer,Freezer,Fridge,Hatching ect (110 Volt)
Inkbird ITC-1000 Dual Stage Digital Temperature Controller Fahrenheit and Celsius Thermostat with Sensor for 3D Printer,Freezer,Fridge,Hatching ect (110 Volt) by Inkbird at Enria Industries. MPN: 43237-2. Hurry! Limited time offer. Offer valid only while supplies last. Fahrenheit and Celsius Display Can Be Choose Temperature Calibrating, Refrigerating control output delay protection Control the Temperature by
Fahrenheit and Celsius Display Can Be Choose
Temperature Calibrating, Refrigerating control output delay protection
Control the Temperature by Setting the Temperature Set Value and the Difference Value
Alarm When Temperature Exceeds the Limit or When Sensor Error
2 Relays, Switch Between Cooling and Heating Modes
Output: 2 Relays
Temperature Measuring Range: -50～210 oF / -50 oC-99 oC
Resolution: 0.1 oF / 0.1 oC
Accuracy: ±1 oF（-50 oF -160 oF）/ ±1 oC（-50 oC -70 oC） Power Supply: 110VAC 50Hz/60Hz
Power Consumption: 3W
Sensor: NTC Sensor
Relay Contact Capacity: Cooling (10A/250VAC)/ Heating (10A/250VAC);
Ambient Temperature: 0 oC-60 oC
Storage Temperature: -30 oC-75 oC
Relative Humidity: 20-85% (No Condensate)
1x Temperature controller ITC 1000 110V
1x 7.87" SENSOR
Features & Highlights
- It does indeed read in deg F.
- Can control both heating and cooling output
- Has an alarm to indicate sensor failure or high temperature
- Highly accurate and reliable temperature controller
- Be more user friendly than the STC-1000
|Package Weight:||0.5 pounds|
|Package Size:||3.9 x 1.6 x 1.6 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Inkbird, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: 3TLS, ean: 0797566265669,
TheTL-Smoother is an addon module for 3D printer stepper motor drivers. The board provides flyback diodes (freewheeling diodes) for the motor outputs, so that they are also protected against induction voltages in the unpowered state of the driver.Yo...
mpn: Hestya-Extruder Nozzle-02, ean: 0711347867262,
Features: Characteristic: The shape is smooth and glossy with lettering, the chamfer is rounded, which can reduce the resistance of the corners, and avoid blocking of the filament, and the contact surface is smooth, which can effectively prevent pri...
mpn: Ive-3D071005, ean: 4568643241366,
Cartridge Heater Description-Cartridge heaters is consist of a cylindrical stainless steel tube and thus provide a high corrosion prevention-The heating wire inside which is wound onto a ceramic core-The number of coils varies depending on the power,...
mpn: LEE002, ean: 6903388513480,
Descriptions:Please recognize the seller: Wangdd22Compatibility: compatible with all 1.75mm V6 E3D Makerbot 3D printer.Notice: Small parts, keep away from childrenSpecification:12V/40W heater,temperature can be up to 280°C（Long-term temperature: 2...
mpn: IC015, ean: 0192187277952,
AIKEER Accessories Series Designed and Manufactured by AIKEER Only Specification of PTFE Teflon Tube Material: PTFE (Poly Tetra Fluoro Ethylene)，Density: 2.15-2.20g/cm3 Heat resistance, up to 260℃ Outside Diameter: 4mm, Inside Diameter: 2mm Colo...
By GO-3D PRINT
mpn: GP 130x160CC, ean: 0799924449568,
Glass is a universal print surface for 3D Printing. Almost all types of filament will print to glass in one way or another. Just place the glass on your print board and clip it in place! To print with ABS or PLA, lightly spray the surface of the glas...
mpn: POT016, ean: 0605175684569,
Note: Two kinds of bottles with same 500g resin will be send randomly.Parameter information:Size: ~500g/500mlColor: GreyMain material: resin monomer, photo initiatorExposure parameters: Bottom exposure time(s) 20-60s, normal exposure time(s) 5-15sWar...
mpn: CC-MK9-Cover, ean: 0667797512521,
Materil:Silicone Color: coffee Item Weight: 2g Item Size: 22 x 22 x 15mm/ 0.66 * 0.66 * 0.6in (approx.) Package List: 3 x Silicone CoverMade of non-stick silicone material. Helps to keep the hotend temperature extremely stable.. Can extend the l...
Description: This modified MK8 Extruder has a filament guide tube, all screws, spare drive gear, and upgraded Bowden tube fitting, for CR 10 3D Printer. Our design gives complete support of flexibles from the intake and output ends. We've reduced th...
mpn: M2560-04, ean: 0866086000255,
This is Micro Swiss All Metal Hotend kit with redesigned cooling block for Wanhao i3 with the following improvements: Micro Swiss All Metal Hotend Kit Features: All metal hotend upgrade for MK10 style extruders. This upgrade includes a modified therm...