Double Sliding Barn Door Hardware Kit with 8 Ft. Track Included - Made in USA
Double Sliding Barn Door Hardware Kit with 8 Ft. Track Included - Made in USA by Mapp Caster at Enria Industries. MPN: BarnDK8Dual. Hurry! Limited time offer. Offer valid only while supplies last. This Double Sliding Barn Door kit is perfect for anyone looking to install a DIY barn door. The barn door kit includes everything you need besides
This Double Sliding Barn Door kit is perfect for anyone looking to install a DIY barn door. The barn door kit includes everything you need besides the tools to install it. The parts included are as follows: Four looped hangers with 3" cast iron wheel - Hanger Length is 14" total and 10" from wheel base to end of hanger and 1.5" wide x 3/16" thick. The holes to attach to the door are located 1" and 6.5" from the bottom of the hanger; 8 foot length track (overall length is 8'4" to accommodate end bumpers) of 1.5" wide x 3/16" thick steel track; 1-5/8" length spacers that hold the track off the wall; Washers that go between the spacers and the wall; 5/16" x 4.5" Lag bolts to attach the track to the wall; 5/16" x 1-1/2" lag bolts to attach the hangers to the door; Two 2" x 2" angle iron end stops; 2 safety anti-jump clips to prevent possible derailment and bolts to attach; Floor mounted door guide fits doors up to 1-7/8" width or can be used with a 1/8" mortise or kerf cut on the bottom of the door (for wider door guides, please contact us). *All Lengths of track 7 feet and over will come in two pieces with splice kit included **The track is not predrilled to allow you to drill holes at the necessary locations. ***Hardware works with doors of 1-1/4" to 2-1/4" thickness. Basic installation instructions will be included and other helpful hints can be found online.
Features & Highlights
- All Parts & Instuctions Needed to Hang Barn Door - Including 8 Foot Track
- Hardware is raw steel and ready to paint or leave unfinished for a rustic look - Made From Quailty Steel in the USA
- General Rule: Track length needs to be double the size of the door
- Hardware works with doors of 1-1/4" to 2-1/4" Thickness; Track hangs 1-11/16" off wall - A backer board might be necessary depending on setup
- Track will come in two pieces with splice kit included
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Mapp Caster, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
By Service Caster
mpn: SCC-100S150-PNB-2-TLB-2, ean: 0092624125931,
Listing is for a set of four (4) Service Caster Series #100 swivel casters, two (2) with top locking brakes, with 6" diameter by 2" wide black pneumatic rubber wheels. Supports a total weight of 1,000lbs (250lbs/caster). When searching for a reliable...
mpn: 272195, ean: 0678655664085,
Wesco full pneumatic wheel rigid and swivel caster. 2500 pounds capacity. Measures 10-inches diameter by 3-1/2-inches width.Full pneumatic wheel rigid and swivel caster. 2500 pounds capacity. Measures 10-inches diameter by 3-1/2-inches width. ...
By Service Caster
mpn: SCC-30CS620-PPUR-TLB, ean: 0092624129489,
1 (one) Service Caster Series #30 caster set of four swivel casters with brakes, fitted with 6 inch diameter by 2 inch wide, non-marking polyurethane tread on polyolefin core wheel. Quality casters featuring double ball bearing heat-treated raceways(...
Krowne Heavy Duty 3/4-10 Threaded Stem Caster, 500 lbs per Caster Load Capacity, Swivel with Brake, 5" Diameter, Set Of 3/4" x 10 x 1", (4 Pieces per Set)"...
By Service Caster
mpn: SCC-30CS620-PPUR-TLB-2-R620-2, ean: 0092624129458,
Listing is for 1 (one) service caster series #30 caster set of four casters; 2 swivel casters with brakes and 2 rigid casters fitted with 6 inch diameter by 2 inch wide, non-marking polyurethane tread on polyolefin core wheel. Quality casters featuri...
RWM Casters 75 Series Plate Caster, Swivel, Kingpinless, Forged Steel Wheel, Roller Bearing, 6000 lbs Capacity, 6" Wheel Dia, 3" Wheel Width, 7-1/2" Mount Height, 6-1/2" Plate Length, 4-1/2" Plate Width
By RWM Casters
RWM’s 75 series caster features the patented Kingpinless design. The 75 series is recommended for the most demanding applications and is available with up to 3" wheels for higher capacity applications. All swivel sections are supplied with a lubric...
mpn: 8InchMaroonCaster, ean: 0652012950707,
This series class is one Caster Barns most recognized and commonly used casters in a broad spectrum of industries and is one of our most popular selling caster series; offering exceptional quality, functionality, value and availability! To offer fast...
mpn: 46-0820-S(4)820PS60-Green, ean: 0635682170163,
Swivel Plate Casters 8" x 2" Polyurethane on Steel Wheels4 x 2 Wheel. 1250# Cap ea.(5000lbs.). ...
By Access Casters Inc.
9" Adustable caster set for Pitco Fryers Reference Pitco B3901504 3" polyolefin wheels with extended top plates Normal height is 9" and can be adjusted up to 1-1/2" 2 Swivels and 2 Swivels with Brakes Typical use: Pitco Solstice Fryers, 14, 14B-C, 14...
By Service Caster
mpn: SCC-30CS620-PPUR-TLB-4, ean: 0092624129472,
Listing is for 1 (one) service caster series #30 caster set of four swivel casters with brakes, fitted with 6 inch diameter by 2 inch wide, non-marking polyurethane tread on polyolefin core wheel. Quality casters featuring double ball bearing heat-tr...