Dake Cut 250 Model Manual Cold Saw, 110V, 1 Phase, 10" Maximum Blade Diameter, 61" Height x 21" Width x 20.25" Length
Dake Cut 250 Model Manual Cold Saw, 110V, 1 Phase, 10'' Maximum Blade Diameter, 61'' Height x 21'' Width x 20.25'' Length by Dake at Enria Industries. MPN: 974250. Hurry! Limited time offer. Offer valid only while supplies last. The Dake Cut 250 model manual cold saw uses up to 10'' circular cold saw blades, has a 1.2 hp motor, and mounts on an included pedestal that houses a
The Dake Cut 250 model manual cold saw uses up to 10" circular cold saw blades, has a 1.2 hp motor, and mounts on an included pedestal that houses a built-in coolant tank and pump. The blade rotates at 44 rpm. The saw head pivots up and down to cut, and rotates 45 degrees to the right and left of center for miter cuts. The saw drive has an oversized steel spindle and a tapered bronze roller bearing gear assembly for heavy-duty use. The hardened and ground spindle shaft has ball bearing support for reliability. The saw is wired for single-phase, 110 volt AC operation.
|Maximum blade diameter||10 inches|
|Motor power||1.2 hp|
|Voltage||110 VAC, single-phase|
|Solid round 90-degree capacity||1.25 inches|
|Solid round 45-degree capacity||1 inches|
|Tube 90-degree capacity||2.75 inches|
|Tube 45-degree capacity||2.375 inches|
|Square 90-degree capacity||2.5 inches|
|Square 45-degree capacity||2.125 inches|
|Rectangle 90-degree capacity||3.875 x 1.75 inches|
|Rectangle 45-degree capacity||2.5 x 1.875 inches|
|Overall dimensions||61 x 21 x 20.25 inches (H x W x L)*|
|Work height||37 inches|
|Overall front to back head up||35 inches|
*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; L is length, the horizontal distance from front to back.
Cold saws are machines used to cut metal with reduced temperature distortion. As the circular blade cuts, the heat generated by cutting is transferred to the chips, leaving the work material and blade relatively cool. Cold saws have a high chip load per tooth and cut at slow speeds to leave fewer burrs than abrasive saws. Liquid coolant lubricates the material and blade during cutting. Saws that operate with a higher hp motor and higher rotations-per-minute (rpm) can cut thicker material than saws with lower rpm.
Dake manufactures industrial strength machines including arbor presses, hydraulic presses, drill presses, power hammers, band saws, belt grinders, tube benders, and auto feed systems. The company, founded in 1887, is headquartered in Grand Haven, MI.
What's in the Box?
- Dake Cut 250 model manual cold saw
- 10" high-speed steel saw blade
- Coolant (1 gallon)
- Tool kit: hex keys (3), threaded rod with adjustable stop, inbound table adapter
Features & Highlights
- Uses circular cold saw blades up to 10" in diameter
- Pedestal mount houses coolant tank and pump
- Motor of 1.2 hp operates at 44 rpm
- Head rotates 45 degrees right and left of center for miter cuts
- Wired for single-phase, 110 volt AC operation
|Item Weight:||3.78 pounds|
|Package Weight:||378 pounds|
|Package Size:||21 x 20.25 x 20.25 inches|