CONFAST 1/2" x 10" Stainless Steel Wedge Anchor (25 per box)
CONFAST 1/2'' x 10'' Stainless Steel Wedge Anchor (25 per box) by CONFAST at Enria Industries. MPN: WAS1210. Hurry! Limited time offer. Offer valid only while supplies last. ApplicationsThe anchor is made from 304 Stainless Steel. This anchor is designed for use in Concrete only, and should never be used in block or brick
The anchor is made from 304 Stainless Steel. This anchor is designed for use in Concrete only, and should never be used in block or brick base material.
The anchor is designed for use in a Wet environment.
Hole Diameter/Bit Diameter
The anchor requires a 1/2" hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.
Diameter of Anchor
The diameter of the anchor is 1/2".
The length of the anchor is 10"
The length of the threads on the anchor is 4" in length.
The minimum anchor embedment into the concrete is 2-1/4". Therefore, the anchor must be installed so that a minimum of 2-1/4" of the anchor is embedded into the concrete.
Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 7-1/4". This will ensure that the minimum embedment of 2-1/4" will be met.
Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/2" diameter anchor requires the hole in the fixture to be 5/8".
Spacing between Anchors
Each anchor must be spaced a minimum distance of 5" from each other when measured center to center.
It is very important not to install the anchor any closer than 2-1/2" from an unsupported edge of the concrete.
Features & Highlights
- FREE SHIPPING-All orders $25 or more ship for free
- MADE FROM 304 STAINLESS STEEL - Can be used in wet, submerged environments and will not rust
- WIDE RANGE OF SIZES - Insures proper fastener for best results
- PACKAGED WITH NUTS AND WASHERS - Fast, quick, complete installation
- HOLE SIZE IS ANCHOR SIZE - Simplicity and ease of installation
|Package Weight:||13.9 pounds|
|Package Size:||4.5 x 3.5 x 3.5 inches|