Banjo EV100FP Polypropylene Electronic Actuated Ball Valve, 12VDC, Full Port, 1" NPT Female
On Sale Now! Save 10% on the Banjo EV100FP Polypropylene Electronic Actuated Ball Valve, 12VDC, Full Port, 1'' NPT Female by Banjo Corp at Enria Industries. MPN: EV100FP. Hurry! Limited time offer. Offer valid only while supplies last. This Banjo EV100FP ball valve is made of polypropylene with a 316 stainless steel ball and stem for strength and resistance to chemicals and
This Banjo EV100FP ball valve is made of polypropylene with a 316 stainless steel ball and stem for strength and resistance to chemicals and corrosion. This valve has a full port flow with a 12V DC electronic actuator for remote on/off control in automated applications. This inline valve has 1" female National Pipe Taper (NPT) threads for connecting two male threaded pipe fittings going in the same direction. It has PTFE (polytetrafluoroethylene) seats for resistance to chemicals, moisture and high temperatures and is rated to 150 pounds per square inch (psi) with a maximum operating temperature of 70 degrees F. This full port ball valve is suitable for use in fluid handling applications.
Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve and is blocked when the ball is horizontally swiveled 90 degrees, so that the hole of the ball is perpendicular to the opening of the valve. Ball valves can be referred to as full port or reduced port (also known as regular or standard port) depending on the inner diameter or the valve. A ball valve is full port if the hole of the ball is the same size as the inner diameter of the connecting pipeline (resulting in lower friction) and termed reduced port if the hole of the valve is one pipe size smaller than the pipe, resulting in less flow through the valve than through the shaft of the pipe. Ball valves may have a handle or lever that aligns with the ball’s position (open or closed) for manual operation. They are primarily used in air, gas, liquid, and steam applications.
Banjo manufactures valves, couplings, pumps, pipe and hose fittings, and other fluid handling products for industrial applications. The company, founded in 1995, is headquartered in Crawfordsville, IN.
Features & Highlights
- Polypropylene with a 316 stainless steel ball and stem for strength and resistance to chemicals and corrosion
- 12V DC electronic actuator for remote on/off control in automated applications
- Full port flow for higher operating efficiency than standard port
- Inline valve for connecting two pipes going in the same direction
- Female NPT threads for connecting to male threaded pipe fittings
|Item Size:||6.4 x 6.7 x 6.7 inches|
|Package Weight:||4.7 pounds|
|Package Size:||6.8 x 6.4 x 6.4 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Banjo Corp, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
By QM Stainless
mpn: VBN2212200, ean: 0717520535522,
This QM Stainless VBN series sanitary butterfly valve is made of stainless steel 304 for resistance to corrosion and high temperatures, Silicone gasket provides extra temperature resistance.Material Type: Stainless Steel SS304. Max Temperature: 240º...
Prince RD526CCAA5A4B1 Directional Control Valve, Monoblock, Cast Iron, 2 Spool, 4 Ways, 3 Positions, Tandem, Spring Center, Lever Handle, 3000 psi, 25 gpm, In/Out: #12 SAE, Work #10 SAE
By Prince Manufacturing
Economical monoblock construction of high tensile strength gray cast iron. Load check on each spool. Hard chrome plated spool. Differential poppet style relief, adjustable from 1500 to 3000 psi. Power beyond and closed center capability. Reversible h...
mpn: 34-350XL, ean: 0612052087191,
Ideal for use where Lead-Free valves are required. Designed for installation on potable water lines to protect against both back-siphonage and backpressure of polluted water into the water supply. Assembly shall provide protection where a potential h...
By Smith-Cooper International
mpn: 01739191Q, ean: 0092201123688,
The Smith-Cooper International 9191 series swing check valve is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Brass can be connected to copper, brass, plastic, aluminum, and welded steel. It ha...
By Replacement Parts Industries RPI
Features Includes: Sealing ball, piston, spring, adjustment screw and hex nut, Allows customer to rebuild the Dental-EZ Vacuum Relief Valve (OEM Part #64622001), Also available: Filter Element and Screen (RPI Part #VPE067) Fits: Vacuum Relief Valve M...
sku: 277-V-82, mpn: V82, ean: 0662005659302,
This Enerpac V-82 needle valve enables regulation of oil flow to control the speed of a hydraulic cylinder (sold separately). The valve can be used as a shut-off valve for temporary load holding. The 3/8"-18 National Pipe Thread Fuel (NPTF) female co...
By Apollo Valve
mpn: 4A204T2F, ean: 0670750327612,
This Apollo 4A204T2F reduced pressure zone with ball valve and SAE threaded test cocks is made of bronze for higher strength and corrosion resistance than brass, and has stainless steel handles. The captured spring cartridge check valves are modular ...
By Prince Manufacturing
The Prince valve model DRV is a differential poppet type double relief. This valve uses the same relief cartridge as the model RV. The double relief is used in systems that require cross over relief protection such a reversible hydraulic motor, or sy...
By Robert Manufacturing
Standard Bob stainless steel float valve assemblies consist of valve, float ball with stainless steel stem for positive level control. For use in industrial applications where caustic fluids or sanitary conditions exist. Applicable for precision liqu...
By Smith-Cooper International
mpn: 01728170PL, ean: 0092201385307,
The Smith-Cooper International 8170L series brass inline ball valve for potable water service has a lever handle and National Pipe Taper (NPT) female threads on both ends. This valve body is made of brass for corrosion resistance, ductility at high t...