Anycubic POT016 LCD Uv 405 nm Rapid Resin for 3D PRINTER-500Mll/500G-Grey (Bottle Random)
Free Shipping Included! Anycubic POT016 LCD Uv 405 nm Rapid Resin for 3D PRINTER-500Mll/500G-Grey (Bottle Random) by Anycubic at Enria Industries. MPN: POT016. Hurry! Limited time offer. Offer valid only while supplies last. Note: Two kinds of bottles with same 500g resin will be send randomly.Parameter information:Size: ~500g/500mlColor: GreyMain material: resin monomer,
Note: Two kinds of bottles with same 500g resin will be send randomly.Parameter information:Size: ~500g/500mlColor: GreyMain material: resin monomer, photo initiatorExposure parameters: Bottom exposure time(s) 20-60s, normal exposure time(s) 5-15sWarranty: 12 monthsResin parameters:Solidify wavelength: 405nmHardness (D): 79.0Viscosity (25C): 552.0 mpa. sLiquid density: 1.100 g / cm3Solid density: 1.184 g / cm3Flexural strength: 23.4 MpaTensile strength: 23.4 MpaElongation frequency: 14.2 % Precautions: 1. Storage1) Keep away from light and sealed at room temperature. (Sunshine contains a certain amount of UV light which would solidify photosensitive resin. Inside the machine, the ANYCUBIC resins would not be affected for over 48 hours if it is not UV light)2) It is recommended to store the resin under 15C -35C in a sealed container. Avoid any dusty or moist environment. 2.Usage:1) Shake well before use. Avoid any direct sunlight during usage. 2) Do not put in the mouth. Keep it away from the children.3) Wear gloves before use to avoid direct contact with the skin and keep the room ventilated.4) For accidently contact, please wash by plenty of water immediately. Seek medical advice if necessary.5) Finished models are required to clean by high-concentration alcohol (>95%) about 30 seconds and post cure process may be needed for higher hardness.6) Please filter the residual resin in vat back to the container if it would not be used over 48 hours. Polluted residual resin would cause printing issues. 3. DLP printer how to choose corresponding UV resin.Before choose the ANYCUBIC resins for your own 3D printer, please confirm that the UV wavelength of your 3D printer is 405nm. We may not responsible for any damages caused by incorrect use of the resin.
Features & Highlights
- Specifically designed for led light source to achieve better printing quality
- Rapid prototyping. The resin has been developed to reduce the forming time
- Strong adhesion. The adhesion has been improved for higher print success rate
- Appropriate toughness. Anycubic uv resins have good combination of hardness and toughness, which brings easy removal of the POT016 and fine printing details
- Great stability. After cured, Anycubic uv resins show good stability in moist and corrosive environment
|Item Weight:||1.1 pounds|
|Package Weight:||1.45 pounds|
|Package Size:||4.1 x 3.9 x 3.9 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Anycubic, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: CC-MK9-Cover, ean: 0667797512521,
Materil:Silicone Color: coffee Item Weight: 2g Item Size: 22 x 22 x 15mm/ 0.66 * 0.66 * 0.6in (approx.) Package List: 3 x Silicone CoverMade of non-stick silicone material. Helps to keep the hotend temperature extremely stable.. Can extend the l...
Description: This modified MK8 Extruder has a filament guide tube, all screws, spare drive gear, and upgraded Bowden tube fitting, for CR 10 3D Printer. Our design gives complete support of flexibles from the intake and output ends. We've reduced th...
mpn: M2560-04, ean: 0866086000255,
This is Micro Swiss All Metal Hotend kit with redesigned cooling block for Wanhao i3 with the following improvements: Micro Swiss All Metal Hotend Kit Features: All metal hotend upgrade for MK10 style extruders. This upgrade includes a modified therm...
mpn: BLTOUCH, ean: 0732235133337,
Main functions and controls of BLTouch are same as usual auto bed leveling sensor, consists of RC servo and micro switch. Thus, BLTouch can be applied on almost every board. BLTouch fulfilled simple structure and high precision by using progressively...
mpn: H010017, ean: 0714676468544,
If you want to make your printing platform flat enough, ideal stuff is glass sheet. Tempered Silicon glass is rated for higher temperatures than normal sheet glass making it a better material for use as a heated bed. After cracking a few sheets of no...
HiLetgo ESP-WROOM-32 ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller The ESP32 integrated with Antenna switches, RF Balun, power amplifiers, low-noise amplifiers, filters, and management modules, and the e...
mpn: ARQQ-028, ean: 0606157346277,
Package Listing: 3x TL-Smoother Clipping FilterThe TL-Smoother is an addon module for 3D printer stepper motor drivers. Lower vibration lower noise smoother result. The board provides flyback diodes (freewheeling diodes) for the motor outputs. Also p...
mpn: CXS1751M, ean: 7432114996918,
Capricorn XS bowden tubing is enhanced with a proprietary blend of high performance additives. It was developed specifically for 1.75mm filament with an extremely precise internal diameter. When printing flixible filaments in a bowden system, the ins...
mpn: 43219-75528, ean: 0751635696419,
XTC-3D® is a protective coating for smoothing and finishing 3D printed parts. Two liquids are mixed together and brushed onto any 3D print. Coating self-levels and wets out uniformly without leaving brush strokes. Working time is 10 minutes and cure...
mpn: CC-Motor damper-3, ean: 0667797512545,
Nema17 Stepper Dampers are used to decrease noise and resonance in your CNC and 3d Printer. 1 Damper used per Stepper or Electric motor 3d Printers see a 5-10dB reduction in noise when used on X and Y Axis steppers with the vibration damper for nem...