27" FLEXIBLE LONG BOARD SANDER/SANDING BLOCK-PAINT/AUTO
27'' FLEXIBLE LONG BOARD SANDER/SANDING BLOCK-PAINT/AUTO by Full Speed Ahead at Enria Industries. MPN: AFS 27. Hurry! Limited time offer. Offer valid only while supplies last. The handle is made from a red 10 lb. density foam verses the green 8 lb. It features a .020'' base plate and for stiffening elements it uses two 3/16''
The handle is made from a red 10 lb. density foam verses the green 8 lb. It features a .020" base plate and for stiffening elements it uses two 3/16" rods on each side and one 1/4" rod in the middle. Over a year spent developing this tool and it's just what you'd expect for the money. In fact, it'll probably pay for itself in material and time on the first panel. Each sander comes with a set of vinyl end caps to prevent the rods from sliding around and to prevent unwanted scratches when working in tight areas. How They Work and Why They are Unique: By adding or removing flexural rods of same or different diameters in different configurations, you change the pressure to flex-ratio. In other words, you control how much the sander flexes. These sanders will pick out lows that your hand or naked eye almost always miss. The number of rods inserted effects the stiffness of the sander. This allows you to go from sanding the fender of a 1940 Chevy to the hood of a 1965 Lincoln in a matter of seconds. Each sander comes with a set of vinyl end caps to prevent the rods from sliding around and to prevent unwanted scratches when working in tight areas. How They're Made: The base plate on the 4.5", 9", 15", 21" and 27" sanders is made from 1075 tempered spring steel. Ranging in thickness from .008 to .020" depending on length. The base plate on the 36" sander is a little thicker, made from .060" thick aluminum, (around 16 gauge). The flexural rod chases within the sanders are made from polyethylene and the foam handle is made from the finest foam available. What Type of Sandpaper Does it Use? Use adhesive backed sandpaper, or a type of spray adhesive to apply the sandpaper. Why don't they have clips on them? Clips don't keep the sand
Features & Highlights
- 27" Adjustable Flexibility Sander Part# AFS 27
- EASILY SAND OUT ANY FLAWS BY CONTROLLING THE SANDERS FLEXIBILITY
- The NEW 27" Sander has Denser Foam and a Thicker Base Plate!
|Brand:||Full Speed Ahead|
|Part Number:||AFS 27|
|Item Weight:||3 pounds|
|Package Weight:||4 pounds|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Full Speed Ahead, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: 15899, ean: 0048011158990,
Scotch-Brite(TM) SC Surface Conditioning Belt is a durable belt engineered to perform detail work such as blending, blending corners, cleaning, contour finishing, deburring, deburring edges, fine finishing, flat finishing, setting the grain, stainles...
mpn: 5684, ean: 0051131056848,
Foam Hookit Sanding Block Kit containing the top seven most popular blocks in a blister pack shipper. These are to be used as an accessory item with our Hookit abrasive products for sanding filler, primer and other substrates.Sanding blocks delivers ...
mpn: JEA60-9080, ean: 0662755418006,
Jet 60-9080 Premium Ready-To-Cut, 80 GritHeavyweight abrasive. Premarked for cutting. No splices, seams or breaks. Between 8-9 wraps. 80-Grit. ...
mpn: AL-6104, ean: 0792348491588,
ALbrasives Sanding Discs with Premium Aluminum Oxide grain on a durable Film backing and works well for fine sanding. Aluminum Oxide is suitable for a wide variety of materials in both woodworking and metalworking, including ferrous alloys. Aluminum ...