HHIP - Extreame Savings! Save up to 44%
Extreame Savings! Up to 44% off on HHIP products at Enria Industries. Hurry! Limited time offers. Offers valid only while supplies last.
HHIP 3900-6056 MT1 Carbide Tipped Half-Notched Dead Center
mpn: 3900-6056, ean: 0769053031149,
MT1 Carbide Tipped, Half-Notched Dead Center ~ Made of tool steel, hardened and ground.~ +/- .0002" TIR ~Overall length is 3.2" ~ Height of the notch is .30" ~ Widest diameter of the taper is.48".Made of tool steel, hardened and ground. Overall lengt...
HHIP 3900-1852 MT4 Inside to MT3 Outside Drill Sleeve
mpn: 3900-1852, ean: 0769053020983,
MT4 Inside to MT3 Outside Drill Sleeve. For adapting tools with Morse taper shanks to machines having smaller, same or larger Morse taper spindle.Inside Taper 4MT. Outside Taper MT3. For adapting tools with Morse taper shanks to machines having small...
HHIP 3701-0140 Pro R8 To JT6 Drill Chuck Arbo
mpn: 3701-0140, ean: 0769053081939,
Made of 20CrMnTi alloy steel Electrolysis nickel coating Premium hardened & all Ground body for extended tool life. Thread of Drawbar end: R8- 7/16" -20 Maximum RPM is 8,000 T.I.R. is lesser than/equal to 0.0002" Superior finish.Premium hardened & al...
HHIP 2007-0010 #10 x 13/64 HSS 3 Flute Solid Pilot Counterbore
mpn: 2007-0010, ean: 0769053007106,
Continuous pilot counterbores cut rapidly, smoothly and accurately, producing long spiraling chips rather than small metal particles The pilot extends the full Length of the flute portion of the tool As cutter flutes are Ground back due to wear, a ne...
HHIP 3900-3311 Back Plate/Adapter for 6" Lathe Chucks, 1"-8 Threaded
mpn: 3900-3311, ean: 0769053087597,
HHIP back plate/adapter for 6 inch lathe chucks. No bolt holes. Machining is required before mounting your chuck to ensure concentricity. For 3 and 4-jaw chucks. Made of high grade casting steel. Body diameter (a): 160mm, thread (b): 1"-8, reg dia (D...
HHIP 3900-3013 1/8 x 5" 10 Pair Precision Parallel Set
mpn: 3900-3013, ean: 0769053082011,
1/8 X 5" 10 Pair Precision Parallel Set ~ Made from fine quality tool steel stress relieved against distortion. ~ Precision ground and hardened. ~ Complete with fitted durable plastic case. ~ 2 holes in each parallel. ~ Includes the following sizes: ...
ECONOMY AXA-#100 PISTON QUICK CHANGE TOOL POST
Economy AXA-#100 Piston Quick Change Tool Post ~ Interchangeable with Aloris and Dorian same series. ~ All working parts hardened and ground. ~ Completely sealed for maintenance-free operation. ~ Increases Productivity of all lathe operations. ~ Swin...
HHIP 3900-5350 Mini Aluminum Quick Change Tool Post and Holder Kit
You Save: 20%
mpn: 3900-5350, ean: 0769053029573,
Mini Aluminum Quick Change Tool Post & Holder Set ~ Fits 7 X 10, 7 X 12 and 7 X 14 mini lathes. ~ No tools are required to change tools. ~ Made of aluminum. ~ Set includes the tool post, mounting hardware, two turning tool Holders, a boring tool Hold...
HHIP 3401-0602 Heavy Duty Demagnetizer Type 2, 115V~Single Phase
mpn: 3401-0602, ean: 0769053011752,
Operates on 115V AC with on/off switch, 80 W. Table Size: 6.22" x 4.72".Demagnetizes tools such as dies, cutters and punches.; Demagnetizes tools such as dies, cutters and punches. Table Size: 6.22" x 4.72". Operates on 115V AC with on/off switch, 80...
HHIP 3900-5452 Threading and Facing Bar Holder, Type KDK-152
mpn: 3900-5452, ean: 0769053029931,
KDK Type 152 Threading and Facing Bar Combination Holder ~ 5/8" Tool Bit Capacity ~ Interchangeable with KDK same series tool Holders. ~ All of our KDK style tool Holders fit all of the 100, 150, & 200 size bodies as they all have a 1.75" dovetail. ~...
HHIP 3900-1813 R8 to MT3 Sleeve
You Save: 44%
mpn: 3900-1813, ean: 0769053020884,
R8 to MT3 Sleeve. Made of high grade tool steel. Hardened and precision ground. Thread of Drawbar End: R8- 7/16"-20.R8 to MT3. Thread of Drawbar End: R8- 7/16" -20. Made of high grade tool steel. Hardened and precision ground. ...
HHIP 3900-0839 Mt2 Round Collet, 3/16"
You Save: 2%
mpn: 3900-0839, ean: 0769053018614,
Mt2 3/16" Round Collet Morse Taper: External. Made Of High Grade Tool Steel. Hardened And Precision Ground To Close Tolerance.Hole Dia. 3/16" Drawbar End Threads: MT2: 3/8" - 16MT3: 3/8" - 16. Hardened and precision ground to close tolerance. Morse t...
HHIP 5822-1250 1-1/4" Square Shoulder Indexable End Mill
You Save: 4%
mpn: 5822-1250, ean: 0769053055763,
1-1/4" Square Shoulder Indexable End Mill ~ 90° square shoulder milling. ~ Used for slotting and peripheral milling. ~ Excellent alternative to high speed steel, cobalt and carbide end mills for heavy material removal rates. ~ Uses 4 standard APKT-1...
Browse Our Catalog